European 4 in 1 Earrings

width="429"

Designed by Olena Bugrimenko © 2016

Skill Level: All

Materials:

Tools:

Instructions:

  1. Take four closed rings and one open ring. Put the four rings into the open one, and close the ring.

    0

    step1

    2. Line Break
  2. Take another open ring and put two closed ones onto it. Then put the open ring through the last two closed rings from step 1.

    step2
    Line Break

  3. Repeat step 2 until there is 8 small rings in the middle. (6 times)

    step3

    4. Line Break
  4. Prepare the crystals and beads so you can attach them when they are needed. Take 1 small crystal and slide it on one eye pin. Make a basic loop on the end. Take 1 big crystal and slide it on one eye pin. Make a basic loop on the end. Open 3 rings and slide one seed bead on each ring.

    step4

    5. Line Break
  5. Pick up one ring with a seed bead and go through three closed rings, as shown in the picture. Repeat this step twice.

    step5

    6. Line Break
  6. Attach one open ring to the first row of closed rings, as shown in the picture. Close the ring.
    step6
    7. Line Break
  7. Attach crystals to the ring from step 6.

    step7
    8. Line Break
  8. Attach an ear wire and re-read steps 1-8 to make the second earring
    .step8
    Congratulations! You've made your first set of 4 in 1 Earrings!

Check it out! Free Wire Jewelry Patterns

Did you find this pattern through a link from a friend? This Free Wire Jewelry Pattern is just one of dozens of free wire jewelry patterns we send via email. Get patterns like this one straight to your inbox - click here!