Making Wire Weaving Easier
by Deborah Kelly
One tool which is very helpful when weaving with long lengths of wire is a Plastic Kumihimo bobbin.
They can fit long lengths of weaving wire in them and keep the fine wire from kinking.
Instructions
These bobbins easily open up to wind wire around. Start winding the wire around the bobbin by holding the bobbin in place and wrapping the wire around the bobbin a few times. Go over the first wraps of wire to hold them in place.
Deborah Kelly's Making Wire Weaving Easier - , Wire Weaving, Weaving, Wire Weaving, Weaving Wire, wire weaving
Wind the desired length of wire around the bobbin for the project, once the wire is on the bobbin just close the plastic bobbin and say goodbye to tangled and kinked weaving wire.
Deborah Kelly's Making Wire Weaving Easier - , Wire Weaving, Weaving, Wire Weaving, Weaving Wire, wire weaving

Materials

C.H.P Milano Angled Flush Cutter, 5-1/4 Inches
PLR-489.00
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $19.97
  • Gold Club Price: $14.98
Add to Bag
Add All Items to Cart

Tools

26 Gauge Round Dead Soft Copper Wire
H11-26D
  • H11-26D
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 1FT
  • Price: $0.15
  • Gold Club Price: $0.12
Add to Bag
28 Gauge Round Half Hard Copper Wire
H11-28H
  • H11-28H
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 1FT
  • Price: $0.17
  • Gold Club Price: $0.13
Add to Bag
Add All Items to Cart
  • Category: Weaving
  • Technique(s): Weaving