Kate Richbourg's Top Ten Tips Part Two
by Kate Richbourg
Okay gang! In part one I shared FIVE of my top ten wire tips for a "Wiretastic" New Year's. Don't put down those pliers yet! To keep your momentum going, here are five more to keep you on the road to wire work in 2014.
1. Take a class and learn something new. Now as you may know, teaching is my passion. I love to share knowledge about all types of jewelry making techniques. Sometimes if you are having a creative challenge, it may be time to learn some new tips from an expert.

Did you know that WireJewerly.com offers a metal working class on DVD for FREE? All you need to do is pay for shipping if you want it in DVD form. Plus it features the fabulous Patti Bullard, wire and metalworking queen!
Kate Richbourg's Kate Richbourg's Top Ten Tips Part Two - , General Education, Dapping, Dapping Jewelry, How To Punch Holes, Hole Punching, Punch A Hole, Riveting, Riveting Techniques, Wire Rivets, Texturing, Tools, , , Metalworking DVD
2. Hammer it out. Sometimes a wire design just looks better flattened a bit with a hammer and a little texture. I love this chasing hammer. I use the flat side to flatten and work harden my wire components and the ball side to add a little hammered texture. Remember to wield that hammer with a light touch. We are making jewelry here, not building a house!
Kate Richbourg's Kate Richbourg's Top Ten Tips Part Two - , General Education, Dapping, Dapping Jewelry, How To Punch Holes, Hole Punching, Punch A Hole, Riveting, Riveting Techniques, Wire Rivets, Texturing, Tools, , , Chasing Hammer
3. When in doubt, punch it out! Use the sheet metal hole punch plier to pop holes with ease through metal up to 18-gauge. Use pre-cut metal blanks, add some holes and wire wrap them together to create a quick linked earring or bracelet design. The large sized holes will accommodate a variety of heavy-gauge wire and your piece will have a bit more of an edgy look.
Kate Richbourg's Kate Richbourg's Top Ten Tips Part Two - , General Education, Dapping, Dapping Jewelry, How To Punch Holes, Hole Punching, Punch A Hole, Riveting, Riveting Techniques, Wire Rivets, Texturing, Tools, , , Hole Punch
4. Patterned wire is AWESOME! Seriously, when I learned about this patterned wire all I could say was "Wow!" The designs are so interesting!
Kate Richbourg's Kate Richbourg's Top Ten Tips Part Two - , General Education, Dapping, Dapping Jewelry, How To Punch Holes, Hole Punching, Punch A Hole, Riveting, Riveting Techniques, Wire Rivets, Texturing, Tools, , , Pattern wire
5. When in doubt, dap. Watch my video tutorial on how to use Dapping Tools: (coming soon)

Materials

Pattern Wire-Precious Metal
Shop Now
Pattern Wire-Base Metal
Shop Now
Add All Items to Cart

Tools

Chasing Hammer with Wooden Handle, 1 1/8 Inch Face
G3-27
  • G3-27
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $13.95
  • Gold Club Price: $10.46
Add to Bag
7 Holes Metal Punch Kit- 2.38mm to 7.14mm - Pack of 1 Kit
G15-8
  • G15-8
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $54.95
  • Gold Club Price: $41.21
Add to Bag
Free Introduction to Metalworking Instructional DVD
free_metalworking_dvd
  • free_metalworking_dvd
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $34.95
  • Gold Club Price: $26.21
Add to Bag
Entire Metalworking 101 Beginner DVD Series
DVD-METALBEGset
  • DVD-METALBEGset
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $199.75
  • Gold Club Price: $149.81
Add to Bag
Dapping tools
Shop Now
Add All Items to Cart
  • Category: General Education
  • Technique(s): Dapping, Hole Punching, Riveting, Texturing, Tools, Teaching, General Education