Natalie Patten's Wire Wrapped Donut Pendant, Classic Wire Jewelry. Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire. .

Wire Wrapped Donut Pendant

by Natalie Patten
  • Category: Classic
  • Technique(s): Wrapping, Weaving
  • Skill Level: Intermediate
Special Instructions: You may adjust the wire length and weave repetitions as necessary to fit the size of your doughnut.
The one pictured here is 40mm and the central hole is 8mm.

Materials

20 Gauge Round Half Hard .925 Sterling Silver Wire
H8-20H
  • Lesson Quantity: 24.00 inches
  • Purchase Quantity: 1.00 5FT
  • Price: $17.98
  • Gold Club Price: $13.49
Add to Bag
26 Gauge Round Half Hard .925 Sterling Silver Wire
H8-26H
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 5FT
  • Price: $4.34
  • Gold Club Price: $3.25
Add to Bag
Add All Items to Cart

Tools

Chain Nose Wire Pliers
G2-508
  • G2-508
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $32.95
  • Gold Club Price: $24.71
Add to Bag
Premium Jump Ring Mandrels - Set of 2
G7-50
  • G7-50
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $15.97
  • Gold Club Price: $11.98
Add to Bag
C.H.P Milano Italian Flush Cutter, 5 1/2 Inches
PLR-487.00
  • PLR-487.00
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $16.97
  • Gold Club Price: $12.73
Add to Bag
Add All Items to Cart
Instructions
Step 1
Take 2 pieces of 0.8mm/20 gauge wire approximately 30cm each in length
Natalie Patten's Wire Wrapped Donut Pendant - , Classic Wire Jewelry, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire, wire wrapped stone donut pendant
Step 2
Starting from the centre of the wires, wrap them side by side, using 0.4mm/26 gauge wire.
I have kept my 0.4mm/26 gauge wire attached to the reel or bobbin.
Natalie Patten's Wire Wrapped Donut Pendant - , Classic Wire Jewelry, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire, wire wrapped stone donut pendant
Step 3
Once the 0.4mm/ 26 gauge wire is secured around the bottom of the 0.8mm /20 gauge wire, trim off the tail end of the 0.4mm/ 26 gauge weaving wire and tuck in to ensure it does not catch or scratch.
Natalie Patten's Wire Wrapped Donut Pendant - , Classic Wire Jewelry, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire, wire wrapped stone donut pendant
Step 4
Using a "2,2 weave", wrap twice around the bottom wire and twice over both of the wires.
Natalie Patten's Wire Wrapped Donut Pendant - , Classic Wire Jewelry, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire, wire wrapped stone donut pendant
Step 5
Repeat this weave for the length of the circumference of the hole in the doughnut.
To find the circumference of the inner hole, position a scrap piece of wire around the hole and then measure this against a ruler. (I have continued this weave for approximately 3cm, using 8 repeats)
Natalie Patten's Wire Wrapped Donut Pendant - , Classic Wire Jewelry, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire, wire wrapped stone donut pendant
Step 6
Keeping the 0.4mm/26 gauge weaving wire attached, bend your wires to create a circle to fit the hole in the doughnut.
Natalie Patten's Wire Wrapped Donut Pendant - , Classic Wire Jewelry, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire, wire wrapped stone donut pendant
Step 7
Bring the 0.8mm/20 gauge wires up so that they are running straight and parallel to each other at the top of your circle.
Natalie Patten's Wire Wrapped Donut Pendant - , Classic Wire Jewelry, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire, wire wrapped stone donut pendant
Step 8
8. Weave these 4 wires together, I have continued a 2, 2 weave moving up and down the four wires to create a triangle/pyramid weave by wrapping twice each time over the bottom two wires, the middle two wires and the top two wires before weaving back down again to wrap the middle two wires and the bottom wires.
To achieve this, wrap around the bottom two wires twice, bring the weaving wire between these bottom two wires, over the middle two wires, back between the bottom two wires again and over the middle two wires for the second wrap. Then bring the weaving wire up between the middle two wires, over the top two wires, back between the middle two wires and over the top of the top two wires. The weaving wire comes back through the bottom two wires, over the middle two wires, back through the bottom two wires and over the middle two wires for the second wrap, then underneath the bottom wire and over the bottom two wires twice.
Natalie Patten's Wire Wrapped Donut Pendant - , Classic Wire Jewelry, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire, wire wrapped stone donut pendant
Natalie Patten's Wire Wrapped Donut Pendant - , Classic Wire Jewelry, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire, wire wrapped donut pendant
Natalie Patten's Wire Wrapped Donut Pendant - , Classic Wire Jewelry, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire, wire wrapped donut pendant
Step 9
Push down your weave with your pliers after each repetition to create a neat weave and continue this for approximately 12 repetitions.
This part of your weave will become your bail, so it needs to be long enough to run to the top of your doughnut, for the length you would like your bail to be and along the back of your doughnut, so that the weave finishes at the top of the hole on the back of your doughnut.
Natalie Patten's Wire Wrapped Donut Pendant - , Classic Wire Jewelry, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire, wire wrapped donut pendant
Natalie Patten's Wire Wrapped Donut Pendant - , Classic Wire Jewelry, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire, wire wrapped donut pendant
Step 10
Once you have your desired length, cut the 0.4mm/26 gauge wire from your reel and secure in the tail end with your pliers.
Natalie Patten's Wire Wrapped Donut Pendant - , Classic Wire Jewelry, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire, wire wrapped donut pendant
Natalie Patten's Wire Wrapped Donut Pendant - , Classic Wire Jewelry, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire, wire wrapped donut pendant
Step 11
Position your wires against the front of the doughnut stone, aligning with the hole and bend using your fingers or bail step making pliers (or even a pencil) to create your bail height and shape.
Natalie Patten's Wire Wrapped Donut Pendant - , Classic Wire Jewelry, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire, wire wrapped donut pendant
Natalie Patten's Wire Wrapped Donut Pendant - , Classic Wire Jewelry, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire, wire wrapped donut pendant
Natalie Patten's Wire Wrapped Donut Pendant - , Classic Wire Jewelry, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire, wire wrapped stone donut pendant
Step 12
Bring the unwoven lengths of the 0.8mm/20 gauge wire through the hole in the doughnut, and through the circular weave so that they come up through the front of the stone.
Natalie Patten's Wire Wrapped Donut Pendant - , Classic Wire Jewelry, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire, wire wrapped donut pendant
Natalie Patten's Wire Wrapped Donut Pendant - , Classic Wire Jewelry, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire, wire wrapped stone donut pendant
Step 13
Separate these wires out, so that you have two wires on either side of the weave and bail.
Natalie Patten's Wire Wrapped Donut Pendant - , Classic Wire Jewelry, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire, wire wrapped donut pendant
Step 14
Then bring each pair of wires back around the doughnut and through the hole again. This will secure your bail in place.
You can flatten these wires to the stone using your fingers or nylon coated pliers.
Natalie Patten's Wire Wrapped Donut Pendant - , Classic Wire Jewelry, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire, wire wrapped donut pendant
Step 15
The four tails of 0.8mm/20 gauge wire should be protruding through the front hole of the doughnut, you can now curl these using round nose pliers to create decorative swirls and curls.
Natalie Patten's Wire Wrapped Donut Pendant - , Classic Wire Jewelry, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire, wire wrapped donut pendant
Natalie Patten's Wire Wrapped Donut Pendant - , Classic Wire Jewelry, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Weaving, Wire Weaving, Weaving Wire, wire wrapped donut pendant