Symmetry in Design

By on July 27, 2016
Print Friendly

by Judy Ellis, Wirejewelry.com

Wire Jewelry Tip for July 27th 2016

Creating Symmetry in Design

by Sarah Thompson

We love when our contributors give us great tips for our readers – today is one of those. Have you ever had trouble getting your designs to look the same on each side? Sarah gives us a tip on how to accomplish symmetry!

Sarah Says:

sarahcut

Symmetry is a big part of my designs. But just eyeballing your symmetry can lead to minute errors that all add up and in the end can dramatically throw off your finished design. To help you achieve better symmetry here is one trick that I use.

Steps for Symmetry:

Take a square ruler and line up the bottom to the edge of your table. Cut a 6 inch strip of masking or scotch tape and line it up to the vertical edge of your ruler.

10-a

Lay it down and press it firmly to your table. Move the ruler up a couple of inches, keeping it in line with the tape. Cut another 6 inch length of tape( I like using two different colors) and line it up to the horizontal edge of the ruler, let a couple of inches cross over the previous tape to form a “+”.

10-b

Lay down the tape and firmly press to the table. I like using my nail to run along the edges where the two tapes over lap so I can see the indentation of the tape below.

10-c

You now have a two axis that you can use to quickly line up your work as you go to verify that you are truly center and keeping the wire-work symmetrical.

 

I hope you enjoyed this quick tip on creating symmetry from Sarah. If you’d like to read more of Sarah’s blog posts – CLICK HERE!

Happy Wrapping!

Click to Receive Daily Tips by Email

One Comment

  1. avatar

    Maureen Strother

    July 28, 2016 at 9:06 am

    This tip came just in time. I am working on a necklace design for a bride and I have been struggling trying to get the symmetry I want. This tip is so simple I kind of feel like…why didn’t I think of that. Thank you so much.
    Maureen Strother

    Artfully Adorned, LLC