Featured Tool: Solder Cutting Pliers

By on September 7, 2015
Print Friendly

by Judy Ellis, Wirejewelry.com

Featured Product Tip for September 7th, 2015

Today our featured tool from JewelryTools.com is the Solder Cutting Pliers PLR-818.00

Looking for a good pair of cutters? We have more than 100 different pairs for you to choose from. A solid pair of cutters is necessary for most jewelry artists. Cutters are required for cutting wire, sheet metal, sprues, jump rings and much more. When you are working with Solder and pliers – you want to have the most effective tools right at your fingertips!

Watch as Kate Richbourg hows us a quick tip on just how to use the Solder Cutting Pliers PLR-818.00


 

 

 

 

Our solder cutting pliers offer two ways to cut. A Jewelry Tools Best Seller, it cuts sheet solder in 1/16″ (1.60mm) squares or wire solder up to 18 gauge in 1/16″ (1.60mm) lengths. Fast and easy, but it does not flip solder pieces and gives you the same amount every time. Length 5-1/2″ (140mm).

Other products that you might be interested in:

1 DWT each: soft, medium, hard

Line Break

Product ID: SOL-845.10

This soldering wire is great for jewelry and other crafts that require soldering. This soft silver solder, 65, comes in a 1 ounce coil. 20 gauge. The flow point of this wire is 1,325 degrees Fahrenheit and melts at 1,240 degrees Fahrenheit.

If you need additional tools make sure to take a look at www.JewelryTools.com

Happy Wrapping!

Click to Receive Daily Tips by Email