Home   >   Daily Wire Jewelry Tips   >   Preventing Scratches on Cabochons

Preventing Scratches on Cabochons

By on June 25, 2014
Print Friendly

by Judy Ellis, Wire-Sculpture.com

Wire Jewelry Tip for June 25, 2014

Preventing Scratches on Cabochons

We’re always getting questions from readers and today I thought we’d revisit a question from an earlier post. I’m sure some of you have had the same question as you’ve begun learning how to wire wrap.

Question: How do I prevent scratches on my cabs when I adjust the top wire on pendants and rings, such as the Pharaohs Ring?

Answer:  There are three basic guidelines that can prevent scratches on your cabochons while locking them into a frame or setting.

Pharaoh Cabochon Ring

  1. Never use a twisted wire as the wire to pull over the top of a cabochon.
  2. Be sure you have used enough wires for a cabochon frame, because having to reach down with a tool and pull a wire up and then bend it over a cabochon can scratch the cab.
  3. Practice your cabochon ring and pendant frames using stones with a Mohs hardness of 6 or more, such as quartz, jasper, and agate. When you are more confident with your tool techniques, then move on to softer stones such as malachite.

Answer contributed by Dale “Cougar” Armstrong

If you’d like to learn how to do more extensive wire work, take a look at our selection of Wire Jewelry Books and Instructional DVDS. We have many plenty choose from.

Happy Wrapping!

Do you love this information- why not sign up today for your FREE Jewelry Making Patterns. It’s a great place to start!

Click to Receive Daily Tips by Email

3 Comments

  1. avatar

    Patience Kathryn

    June 25, 2014 at 8:39 am

    I love your helping suggestions to help us be better jewelers. I was wondering what the stone is in the Pharaohs ring. It is very pretty. Is it from this website?

    I’ll be reading more tips, thanks again.

    • avatar

      beverly

      June 29, 2014 at 4:15 pm

      Hi Patience I think the stone in this article is a Larimar which is one of my favorite stones. I haven’t seen any Larimar for sale here but it was on the gem profiles I think. It is such a beautiful stone and the ring is lovely. BeBeaz

  2. avatar

    beverly bishop

    June 29, 2014 at 1:23 pm

    I designed a way to keep my cabs from scratches so I can use even opals in this setting. It was really an accident as I used a flat opal stone without any dome and what to do with the wires on the side was the trouble. I started making swirls with the wires one at a time and placed them on the stone on both sides in a decorative style and it worked very well. It protects the opal yet it can been seen and I get quite a lot of complements when I wear it. I have taught a few of my advanced students this technique using all sorts of stones and it is quite lovely no matter what the stone used. BeBeaz